Furniture disassembly and assembly in Al Rawdah for family homes
Al Rawdah is a well-known residential district of Jeddah, and many of its homes have a family character: a main bedroom, children's rooms, a living room, a majlis or guest room and sometimes a small study. Homes like these collect a wide range of furniture. Some pieces were bought flat-packed, some were made to measure, and some came from an earlier family home. So in Al Rawdah we treat dismantling and assembly as work tied to family details: who sleeps where, what a child needs in the room from the first night, and what can wait a few days without upsetting anyone.
The first thing we do is ask about priorities in the new home. Children's rooms and beds are usually built first because the family needs to sleep on moving day itself. Then the main bedroom, then the living room, then everything else. That simple order changes how the truck is loaded, because what will be assembled first must come off the truck first at the new address.
Children's rooms: bunk beds, storage and small desks
A child's room holds an unusually varied set of furniture for its size: a bunk bed or a bed with drawers, a small wardrobe, a study desk, toy shelves and maybe a bookcase. For bunk beds we take off the ladder and side guards first, then the upper bunk, then the main frame, and we pay special attention to the load-bearing bolts because they matter most for a child's safety. At assembly we tighten them firmly and test the guard rail and ladder before handing the room over.
Toy shelves and low bookcases are light but have many small parts, so we write the room on every box and bag and keep the tiny supports, which are easy to lose, inside. We also suggest parents keep favourite toys and bedding in one separate bag that is opened first, so the room feels familiar to the child as soon as they arrive.
| Children's room item | What we do | Safety note |
|---|---|---|
| Bunk bed | Remove ladder and guards, then upper bunk | Tighten load-bearing bolts firmly at assembly |
| Bed with storage drawers | Remove drawers first, then frame | Keep drawer runners in a bag |
| Children's wardrobe | Remove doors and shelves | Anchor to the wall where needed |
| Study desk | Remove drawers and upper shelves | Adjust height after assembly |
| Low bookcase | Dismantle and number the shelves | Light fixing to the wall if needed |
Flat-pack furniture: pieces bought in boxes
A lot of family furniture today is sold in flat boxes and built at home. It has its own quirks: special screws and fittings that weaken if taken apart and rebuilt many times. So we dismantle such pieces carefully, avoid forcing screws, and keep the original screws and fittings together. If the piece has already been taken apart once, it may need extra fittings or a touch of wood glue in worn holes, and we tell you before starting so there are no surprises.
If you still have the original assembly sheet or a link to the online manual, please send it. It helps us order the parts and identify the small screws, because some pieces look alike but differ in their holes.
Main bedroom and guest room
The main bedroom often has a wide wardrobe with sliding doors, a large bed, a dressing table and bedside tables. We dismantle the wardrobe as described earlier, with numbered doors and shelves, and carefully disconnect any internal lighting or glued mirrors. The dressing table mirror needs the most protection: it comes down first, is wrapped on its own and goes in a safe part of the truck away from heavy loads. In the guest room or majlis there may be Arabic-style sofas, tables and heavy rugs; we wrap them by type and agree with you what will be dismantled.
Bookcases and wall units in the living room
Many homes here have a big TV unit or a bookcase covering a whole wall. We take these apart according to their sections: hanging upper units first, then the base units, and we write the position of each part on it, from right to left and from top to bottom. In the new home we measure the wall again before assembling. If the wall length differs, we arrange the parts to suit rather than force an old layout that no longer fits. If the unit must be fixed to a new wall, we agree with you before drilling.
Preparing the home before dismantling
- Empty wardrobes and drawers and place belongings in numbered boxes by room.
- Keep children's clothes, bedding and favourite toys in a bag that is opened first.
- Unplug appliances connected to furniture such as the TV and lamps.
- Photograph assembled pieces before dismantling to help at assembly.
- Decide in the new home which child sleeps in which room and where the beds go.
- Leave space in the new place for dismantled panels so they do not block movement.
A suitable order for a family moving day
- The crew arrives and walks through the rooms to decide what is dismantled and what travels whole.
- Beds and wardrobes are dismantled, labels applied, screws gathered.
- Mirrors, glass and glossy fronts are wrapped.
- The truck is loaded so children's beds and bedding are last in and therefore first out.
- The truck is unloaded and pieces are distributed to rooms.
- Children's beds are built first, then the main bedroom, then the living room.
- A final walk-through with you to check stability, doors and assembly quality.
Child safety: the part we never skip
Tall furniture such as wardrobes and bookcases can tip if a child climbs on it. We recommend anchoring these to the wall where possible, we check the guard rails of high beds, and we make sure small screws and sharp tools are not left within children's reach after the job. If there is a baby in the home we suggest the baby's room is the last to be dismantled and the first to be assembled, with wooden surfaces wiped clean before use.
Humidity and heat and their effect on flat-pack furniture
The pressed wood used in much flat-pack furniture reacts to humidity, and its edges can swell slightly over time. When dismantling we watch for those edges and never force a stuck part; we use suitable tools. After assembly we suggest leaving a small gap between furniture and any damp wall and avoiding direct strong sunlight, which can change the colour of fronts.
Mistakes we often see in family homes
- Dismantling a child's bed days before the move and spending nights without a bed.
- Leaving small screw bags unnamed in a shared box.
- Loading mirrors on top of heavy furniture or between sharp edges.
- Postponing the decision about where beds go until the moment of arrival.
- Skipping wall anchors for tall wardrobes in children's rooms.
Cost factors without fixed numbers
Cost depends on the number of beds, wardrobes and bookcases, whether the home has flat-pack furniture that is complicated to rebuild, the presence of a lift or many stairs, how close the truck can park to the door, and whether you need dismantling only or dismantling, moving and assembly. We explain the estimate once we know the details.
Related pages for Al Rawdah
For moving to or from the district see furniture moving in Al Rawdah and moving from Al Rawdah to Al Shati. For packing before dismantling see packing in Al Rawdah. For general information see furniture disassembly and assembly and bedroom dismantling in Jeddah.
Before you call
Prepare these details: the number of bedrooms and children's beds, whether there is flat-pack furniture that needs an assembly sheet, whether the home has wall units or large bookcases, and whether there is a lift and which floor. Then contact us by phone or WhatsApp and we will agree a time that suits your family.
Questions we ask when you book
In the first call we ask a few short questions that define the size of the job: how many bedrooms are there, how many beds need dismantling, are the wardrobes built into the wall or freestanding, do you have kitchen units or bookcases you want to take, which floor are you on, is there a lift, and can the truck park near the door? Are some pieces very old or special to the family and in need of gentler handling? The answers decide how many people we send, which tools we bring and how long the work should take, and they save you a surprise on the day.
We also suggest you send a photo of each room from an angle that shows the large pieces, and a photo of the flat door and building entrance. One picture of a wardrobe under a low ceiling or a narrow staircase saves half an hour of guessing.
What if an old piece has worn joints?
Sometimes at dismantling we find that an older piece can no longer take being taken apart: screw holes are worn, the back panel of a wardrobe is thin and cracked, or a bed edge is starting to crumble. We do not ignore it. We tell you at once and offer options: a simple repair with wood glue and longer screws, a different assembly that spreads the load, or carrying the piece whole after strapping it if that is possible. The decision is yours, and we explain what to expect from each so a piece does not start moving a few weeks later.
For old furniture that matters to the family, such as a bed inherited from a parent or a solid wood wardrobe, we work more slowly and carefully, avoid stressing the original joints, and wrap it in more layers than usual. Value is not always the price of the piece but its story.
Frequently asked questions
Do you assemble bunk beds safely?
Yes. We tighten the load-bearing bolts and check the guard rails and ladder before handing over, and we advise checking them from time to time afterwards.
Do you handle flat-pack furniture?
Yes. We dismantle it carefully and keep the original screws and fittings together, and we warn you if the fittings are weak after an earlier dismantling.
Can the children’s rooms be built first on moving day?
Yes. We plan loading and unloading so children’s rooms are built first and ready for sleeping.
Will you anchor tall wardrobes to the wall?
We do it where needed and with your agreement, especially in children’s rooms, and we agree before any drilling.
What about mirrors and glass fronts?
They are removed or wrapped individually and placed in a safe part of the truck away from heavy loads.
How do I book in Al Rawdah?
Call 0548204074 or message us on WhatsApp with the number of rooms, beds and the pieces to be dismantled.