Moving from Al Rawdah to Al Shati
Moving from Al Rawdah to Al Shati means moving to an area close to the Jeddah Corniche, often into multi-storey buildings with lifts, management and sometimes moving rules. So our preparation here centres on the new building: the lift, temporary parking, carrying hours and protecting entrances and corridors.
| Comparison | Al Rawdah | Al Shati |
|---|---|---|
| What we check before the move | Old entrance and where the truck can stop | The lift, building management and temporary parking |
| Furniture care | General wrapping and taking apart what will not pass | Extra protection to avoid marking the lift and corridors |
| Coordination | Exit time and handing over the home | Entry time and any moving permit |
| Main concern | Not leaving items behind | Number of lift trips and organising the pieces |
The lift and management: arrange these first
Before moving day, ask the new building’s management about lift hours, whether there is a fee or permit, whether any hours are off-limits for moving, and whether a freight lift exists. This decides the order of work and the crew size, and saves us from waiting that lengthens the job.
Protecting the building and the furniture
We cover furniture corners, doors and shelves, carry long pieces at the right angle in the lift, and take apart whatever will not fit. In buildings facing the coast we also account for humidity and dust when wrapping. If you have very large pieces, we prefer to see the entrance or a photo of it in advance.
The sequence of work
- We agree the date and take details of the old and new homes and the lift.
- We wrap the furniture and take apart large pieces in Al Rawdah.
- We load the truck in an order that suits unloading in Al Shati.
- On arrival we coordinate with management on the lift and where to park.
- We move the pieces in organised batches, assemble them and go over the list with you.
What to prepare
- Make sure a temporary parking spot or permit is available at the new building.
- Book the lift or ask about its quiet hours.
- Empty wardrobes and disconnect appliances.
- Decide a room for each piece before arrival.
- Keep carrying routes clear of belongings.
Notes
- If the building prohibits moving at certain times, set the appointment to fit them.
- We recommend sending photos of the building and the lift if you are unsure of their dimensions.
Price factors
We do not announce fixed prices. The offer depends on the amount of furniture, the floor and lift, where the truck can park and how many trips are needed, plus any disassembly, assembly and packing you ask for. For the two districts see furniture moving in Al Rawdah and furniture moving in Al Shati.
A practical view of moving between Al Rawdah and Al Shati
Al Rawdah and Al Shati are Jeddah districts that many residents move between, seeking a home nearer the waterfront, a workplace or a school. Moving between two neighbourhoods of the same city is not always simple, because the building, its lift, truck parking and daytime traffic all change the working time. So we start with specific questions before booking: how many rooms, which floor, whether there is a lift, what the largest piece of furniture is and whether anything needs dismantling.
Because Al Shati is coastal and has many multi-storey buildings, we coordinate with management and the doorman before the day and bring covers to protect lifts and walls when needed. Al Rawdah has a mix of villas and apartments, so the work order differs from home to home; we do not use a single template for every customer.
Splitting the move into clear stages
- Stage one: contact and details by WhatsApp or phone, with photos of large furniture and building entrances.
- Stage two: agree the date and the scope: moving only, moving with dismantling and assembly, or moving with packing.
- Stage three: prepare the home: sort items, empty drawers, disconnect appliances and gather important papers.
- Stage four: moving day: crew arrival, building protection, organised loading, travel and unloading.
- Stage five: assembly and review: place pieces, reassemble what was dismantled and make a final walk-through.
This breakdown shows what will happen, what you should prepare and what we handle. At each stage you can ask or adjust, because a successful move rests on continuous communication rather than one agreement at the start.
Dismantling and assembly between nearby districts
Not all furniture needs dismantling. Large wooden beds, wall-attached wardrobes and long desks are the most likely candidates, while sofas, dining tables and small pieces usually move whole. The decision depends on door and corridor sizes in both buildings, the type of piece and whether good protection can avoid dismantling. If you do need it, we advise having the assembly done while you are at the new home to decide where pieces go.
- Screws and fittings are kept in sealed bags taped to the parent piece.
- Complex pieces are photographed before dismantling to make assembly easier.
- Wooden parts are wrapped to avoid scratches in transit.
- Shelves and drawers are checked after assembly for alignment.
Protecting the building and the neighbours
Moving inside residential buildings affects neighbours, so we advise notifying them of the date and avoiding usual rest hours. Some buildings require a deposit with management, so ask before the day. We cover corridor floors and lifts, protect corners and use suitable trolleys to reduce noise and the chance of damage.
Large appliances between the two districts
Refrigerators and washing machines need particular care. A fridge should be emptied and switched off hours before the move, carried upright where possible and left to settle in the new home before being switched on, following the manufacturer guidance. A washing machine needs its hoses disconnected and its drum secured where a transit lock exists. Split air conditioners are installed and removed by a qualified technician, and we do not claim to do so unless it is explicitly agreed.
What we do not recommend
- Leaving packing until the crew arrives.
- Leaving drawers full of heavy or fragile items.
- Not measuring the new home entrances before the date.
- Moving documents and jewellery with the furniture instead of carrying them yourself.
- Agreeing the scope verbally without specifying dismantling, assembly and packing.
Avoiding these five mistakes saves time, effort and unexpected cost, and they reflect what commonly recurs in moves within large cities.
How to contact us for an Al Rawdah to Al Shati move
Call the number at the top of the page or message us on WhatsApp with photos of your furniture, the number of rooms and the floor, and we will reply with practical details. We do not give fixed prices before knowing the facts, because price changes with volume, floors and requested services; we would rather explain the factors than quote a generic number that may not fit your case.
Questions people ask when moving between Al Rawdah and Al Shati
Does the work change if the move falls on a weekend? Roads are usually busier and appointment demand rises, so we prefer early booking, and midweek may suit anyone wanting a calmer day. Can part of the furniture move now and the rest later? Yes, and it suits people who receive the new home in stages or who are doing maintenance and painting before the full move; we agree each stage separately.
What if the handover of the new home changes? Tell us as early as possible so we can adjust, because changing the schedule a day or two ahead is far easier than on the morning of the move. Must I be present throughout? Ideally a family member is at each home, one at loading and one at unloading, since the owner of the belongings makes the small decisions that arise during the work.
Rooms that take longer than people expect
Kitchens, storage rooms and home offices take the most time because they hold many small items, papers and varied tools. Living rooms look bigger but are relatively quick since their pieces are large and few. To shorten the day, sort these three rooms two days beforehand and give every box a clear label. Also leave corridor space clear before the crew arrives and move private cars away from the building front if possible so the truck can park.
Frequently asked questions
Does the lift affect moving time?
Yes. The number of lift trips and the lift schedule are among the main things that decide how long the job takes in multi-storey buildings.
Do I need a permit from the building management?
Some buildings require one, so ask management before the appointment and tell us the instructions.
Do you protect the furniture and the lift?
We cover the furniture, protect corridors where possible and coordinate with management.
Do you take apart and assemble furniture?
Yes. We take it apart in Al Rawdah and assemble it in Al Shati according to the room plan.
How do I book?
Call 0548204074 or message us on WhatsApp with the details of both buildings.