Furniture Moving in Al-Marjan, Jeddah: Towers, Lifts and Humidity Need Their Own Plan
Anyone searching for furniture moving in Al-Marjan, Jeddah is usually moving to or from a flat in a tall building, possibly close to the seafront or overlooking it. This kind of move differs from moving a ground-level home in three ways. The lift is the artery of the whole job and needs coordination with building management. Humidity and sea air affect furniture and appliances. And loading space in front of towers can be limited and subject to parking and security rules.
Here we explain how we approach a tower flat: advance coordination with management, booking the lift, wrapping furniture to suit the humidity, ordering the work on a high floor, and what we do about balconies, curtains and air conditioners. We do not publish fixed prices; we explain what affects the cost so that you can ask for an accurate quote.
Step One: Coordinate With Tower Management
Many towers and residential compounds have moving regulations: permitted hours, a service lift or a booking system for the passenger lift, perhaps security procedures for workers, and sometimes a requirement to protect floors and walls. So the first thing we recommend is to contact management a few days ahead and ask about available times, conditions, how workers and the truck are registered and where the truck may stop.
We also need you to tell us who will receive us at the entrance and how to reach them so the crew is not held at the gate. If the new building has similar rules, book the slot there too, so that unloading happens at a time that does not rush the crew.
- Moving hours: these may be limited to certain daytime periods.
- The lift: a service lift or a time-slot booking.
- Registration: worker and vehicle details may be requested.
- Protecting the building: covers for lift walls and corridors.
- Parking: a set loading area or a time limit.
Booking the Lift and Splitting the Crew
In a tower the lift is the neck every item must pass through, so we plan the job so nobody stands waiting for it. We split the crew into a group in the flat who prepare, wrap and bring pieces to the door, a group at the lift who carry and lower, and a group at the truck who receive and stack. If the lift is small we divide loads into batches that suit its capacity and dimensions, and we carry sofas and mattresses folded or compressed where possible.
Very long pieces that will not fit the lift are dismantled, or taken down the stairs if that is safe, and we never try to squeeze a protruding piece through a closing door. On a very high floor the stairs are not realistic except as a last resort, which is why we concentrate on smart dismantling before anything goes into the lift.
Humidity, Sea Air and What They Do to Furniture
Areas near the sea in Jeddah see high humidity on many days of the year and perhaps salt spray that shows on metal and glass surfaces. This environment makes wood expand and contract, can dry out or mildew leather that was wrapped while damp, can corrode electronic ports, and over time can rust metal frames. During a move we take this into account.
- Wood: covered with cloth or foam rather than tight plastic, and not left in sun or a closed truck for hours.
- Leather: wiped dry before covering, avoiding tightly sealed plastic bags.
- Electronics: carried in original packaging or padded boxes and kept away from moisture.
- Metal: dried before wrapping and wrapped in soft paper.
- Mattresses and pillows: covered with cloth or perforated plastic as suits the case, and moved dry.
If the new home is also in a tower with high humidity, do not switch appliances on the moment they arrive; let them settle as the manufacturer advises, and bring wooden furniture into an air-conditioned space gradually.
Wrapping Screens, Appliances and Sensitive Furniture
Many tower flats have large screens, entertainment systems and smart devices. We photograph the cable connections before disconnecting so we can reconnect them accurately. A screen travels upright in its cover and is strapped to avoid vibration. Furniture with a glossy or lacquered finish, or glass, gets a soft layer first and then a thicker cover, and we avoid sticking tape directly onto a shiny surface. Details on wrapping are on our page about furniture packing and wrapping.
Balconies, Curtains and Air Conditioners
Tower flats often have outdoor furniture on the balcony: chairs, tables and plants. These pieces are exposed to sun and salt, so they need a light wash and drying before wrapping. Heavy curtains and metal rods are taken down before carrying. Wall-mounted air conditioners need a qualified technician to remove and refit them and to recharge gas where necessary; we do not promise that if it is outside our crew's scope, but we coordinate with you so the technician is present at the right time.
Order of Work in a High-Floor Flat
- Pre-pack things you do not use daily the day before.
- Morning of the move: protect the lift and corridors and review the list.
- Dismantle beds and wardrobes and prepare appliances.
- Carry large pieces first, then appliances, then boxes.
- Load the truck from heaviest to lightest.
- On arrival book the lift at the new building and unload in order.
- Reassemble beds and the kitchen first, then the other rooms.
- Make a final check of pieces and surfaces.
Moving From One Tower to Another: Two Lifts, Two Schedules
When you move from a flat in one tower to a flat in another, you have two lift systems, two sets of rules and two parking arrangements. The first may allow moves only in the morning and the second only after noon, creating a gap between loading and unloading that must not turn into a long wait for a loaded truck in the street. We arrange the schedule with you so the times are as close as possible, and if that is not possible we suggest splitting the move over two periods, or taking the essentials first and the rest later.
It helps to know before the day which lift in the new tower is for moves, whether it allows long pieces, and how long you wait for it at peak times. If the keys to the new flat have not been handed over yet, do not book the truck before the handover is confirmed. A flexible appointment saves you waiting fees you do not need.
Glossy, Lacquered and Glass Furniture
A lot of modern flat furniture has a glossy or thinly lacquered surface that the slightest friction marks. We cover shiny surfaces with a soft layer of paper or cloth before any other cover and never put adhesive tape directly on lacquer, because it can lift some of the finish on removal. Glass tables travel upright in a cardboard frame with foam corners and are carried by at least two people, avoiding any sudden movement. Interior glass shelves of cabinets are removed, wrapped and carried separately.
- Glossy surfaces: soft paper first, then a thick cover.
- Glass: cardboard frame, foam and upright carrying.
- Sliding doors: lifted from their tracks, wrapped and carried upright.
- Lamps and chandeliers: dismantled and wrapped in their own boxes.
Big Appliances Inside the Lift
A large fridge, washing machine or freezer travels upright in the lift and is strapped to stop it sliding, with nothing placed on top. We measure the lift depth before lifting to know whether the appliance fits upright or another solution is needed. Thick covers protect the lift walls and we make sure the door does not press on the item. At the new flat we let the fridge settle before switching it on, and install the washing machine on a level floor and check the water and drain connections.
Families and Children on Moving Day in a Tower
In towers everyone uses the same lifts and corridors, so children may face extra hazards as workers move and doors open. We prefer children to be kept away from the lift and corridor during carrying, with a safe place in the flat or with relatives. Pack a small bag for each child with favourite toys and any medicines, because the boxes will be closed and stacked. Do not leave small hazardous items such as screws and tools within their reach.
If Your New Flat Is Not Ready on Time
In new towers handover of a flat can be delayed for administrative or maintenance reasons while the old lease has ended. In this case temporary storage gives you flexibility: we load and wrap the pieces and store them somewhere clean, then bring them to the new flat when it is ready. It is best to write down with you what was stored and its condition at drop-off so you are reassured at collection.
Moving Day Timeline for a Tower Flat
| Period | Work | Reminder |
|---|---|---|
| Morning | Crew arrives, lift protected, furniture dismantled | Confirm names and vehicle are registered beforehand |
| Before noon | Load large pieces and appliances | Do not hold the lift longer than permitted |
| Midday | Small items and boxes | Protect furniture from the sun while waiting |
| Afternoon | Arrive and unload at the new place | Book the lift there and protect floors |
| Evening | Reassembly and check | Test doors and drawers and connect appliances |
Parking and Loading in Front of Towers
In front of towers there may be little parking, or none for large trucks. So we ask where loading is allowed and arrange with security, and sometimes use a smaller truck or make extra trips to avoid fines. It helps to tell building management the type and size of the truck. We never leave a truck in an emergency lane or in front of ambulance entrances.
Mistakes We See in Tower Moves
- Not booking the lift and then waiting for hours.
- Wrapping damp furniture in sealed plastic so mildew appears.
- Ignoring building rules and being stopped from going up.
- Forgetting to compare the lift door with the longest piece.
- Carrying a large screen tilted or without a cover.
- Leaving mattresses unprotected in the waiting area in the sun.
What Determines the Cost of Moving in Al-Marjan
We avoid quoting prices here because every flat is different. Cost is affected by the floor, the lift size and building rules, the number of large pieces, the need for dismantling, reassembly and special wrapping for appliances and screens, the distance between the two homes, and the date and duration of the move. Send us photos of the entrance and lift and a list of the large pieces and we will estimate accurately.
A Quick Checklist Before the Appointment
- Contact management at both the old and new buildings.
- Book the lift and tell security.
- Register worker and vehicle names if required.
- Empty the fridge and disconnect appliances.
- Photograph screen and device connections before unplugging them.
- Prepare boxes with clear labels.
- Keep important papers and valuables with you.
Frequently asked questions
Do you move from towers in Al-Marjan?
Yes, we move from flats in towers and compounds across Jeddah including Al-Marjan, coordinating with building management on the lift and parking.
Do I need to book the lift?
In many towers yes. Ask management about moving hours and booking procedures before the appointment.
How do you protect furniture from humidity?
We use cloth covers, avoid tightly sealed plastic on damp wood and leather, protect electronics in their packaging and avoid sun exposure.
Do you move large screens?
Yes, we carry screens upright in covers or padded boxes and photograph connections before dismantling.
Do you remove air conditioners?
We dismantle and reassemble furniture and coordinate with you for a qualified technician to handle air conditioners when needed.
How do I get a quote?
Call or message us on WhatsApp with the floor, photos of the lift and entrance and the number of large pieces.
Contact: call 0548204074 or message us on WhatsApp.