Assembling new furniture in Al Marwah: what makes it faster and more accurate
Many people in Al Marwah need an assembly service for a reason other than moving. They have bought new furniture from a showroom or an online shop, the pieces have arrived in flat boxes with a long instruction booklet, and they do not have the time, tools or experience to assemble them properly. Others want to rearrange their home, dismantling a wardrobe from one room and rebuilding it in another, or turning a room into a study. This page covers the service from that angle: assembling new furniture and rebuilding existing furniture inside your home in Al Marwah, what we do and what you can prepare.
If you are looking for dismantling and assembly tied to a full house move, see furniture dismantling and assembly in Jeddah and bedroom dismantling in Jeddah. Here we focus on assembly on site.
Before the crew arrives: check the boxes
The first thing that helps you and the crew is checking the boxes before the appointment. Have all boxes arrived? A lot of furniture comes in several numbered boxes (box 1 of 4, for example); if one is missing, do not book assembly until it arrives. Is there visible breakage or scratching on panels? Photograph it and contact the shop to replace it before assembly, since assembling a damaged panel complicates a claim later. Is the full bag of screws in the box? Is the instruction booklet there? These small checks save everyone a lot of time and avoid the crew starting and then having to stop.
| What we check | Why | What we do if there is a problem |
|---|---|---|
| Number of boxes | A box may be missing | We postpone until the missing box arrives |
| Panel condition | Avoids assembling a damaged piece | We photograph and ask you to contact the shop |
| Screw bag | Some parts are not easy to replace | We check against the parts list in the booklet |
| Booklet | Sets the order of assembly | We follow the maker's steps as far as possible |
The tools we bring
Good assembly does not depend on one screwdriver but on a suitable set of tools: screwdrivers of various sizes, hex keys, a rubber mallet to seat parts without cracking them, an electric drill for wall fixing, a spirit level, a tape measure, pencil and gloves. For flat-pack furniture we use a rubber mallet, never a steel hammer, so panel edges do not split, and we watch how hard screws are tightened, because over-tightening wears out the holes in pressed wood and under-tightening leaves the piece wobbling. We lay a protective sheet on the floor while working to protect marble, tile and parquet.
Types of furniture we assemble in homes
The pieces vary with what people buy: wardrobes with sliding or hinged doors, beds and mattresses with particular bases, desks and bookcases, TV units, dressing tables, dining tables, shoe cabinets and ready kitchen units, and children's room furniture. Each has its key points: a sliding wardrobe needs careful adjustment of tracks and wheels, a large bed needs checks on the side rails and centre support, and a tall bookcase needs fixing to the wall. We start by reading the instructions, then lay parts on the floor in the order of assembly before placing the first screw.
The sliding wardrobe: small details
A wardrobe with sliding doors is where good assembly shows most. We start by making sure the frame is square, then fix the upper and lower tracks accurately, hang the doors and adjust the wheels so the doors glide smoothly and do not touch each other. If the floor is uneven we use small levelling shims. We try each door several times and then leave you a note on what to do if a door needs adjustment after a few weeks, because timber settles a little after assembly.
Beds and mattresses: stability first
A bed that creaks on first use annoys its owner for years. So we tighten all the joints gradually, not all at once, make sure the centre rail on large beds sits on its legs, and test by sitting and moving lightly. For beds with storage drawers we test the drawers slide. For children's bunk beds we focus on the ladder and guard rails, tighten the load-bearing bolts firmly and show you how to check them from time to time.
Fixing to the wall: when is it needed?
Some pieces need fixing to the wall for children's safety or stability: tall wardrobes, bookcases and heavy TV units. Before drilling we ask where pipes and cables run if you know, and we check the wall type (concrete, block, plasterboard) to choose suitable screws and plugs. In rented properties we ask whether the lease allows drilling, and if not we offer alternatives such as floor-based fixing. We never skip this point because a tall wardrobe falling is a real danger, especially in a child's room.
Rebuilding existing furniture inside the home
You may need to move a wardrobe from one room to another or convert a bedroom into a study. Here we dismantle the piece with orderly numbering, measure the new room before dismantling to make sure it will fit, and rebuild it while checking the condition of the joints. If we find that old timber has swelled or screw holes are worn, we tell you and suggest repair with wood glue and reinforcement. This is suitable for someone who wants to rearrange the home without a full move, and can usually be done in a single visit.
A working sequence at your home
- The crew arrives and goes over the boxes and parts with you.
- Floor protection is laid and tools prepared.
- Panels and parts are sorted and laid out following the booklet.
- Assembly proceeds step by step, checking each part.
- Wall fixing where needed and with your agreement.
- Doors and drawers are adjusted and the piece levelled.
- The work area is cleaned and empty boxes dealt with as agreed.
- A final walk-through with you and an explanation of simple future maintenance.
Empty boxes and packaging
After assembly, cardboard, foam and bags pile up. We agree in advance: do you want them gathered in one place for you to take out, taken to the area's bin, or do you want to keep some for returning a piece? We always advise keeping the original box and booklet until you are sure the piece is sound, especially if the shop has a return policy. If you decide to discard, flatten cartons and bundle them.
Common mistakes in DIY assembly
- Starting before checking the number of boxes and the screw bag.
- Tightening screws fully at the first step, so panels tilt and holes do not match.
- Using a steel hammer on pressed panels, which cracks the edges.
- Not fixing tall wardrobes to the wall.
- Fitting sliding doors before making sure the frame is square.
- Throwing away the booklet and box before checking the piece is sound.
What affects time and cost
We do not quote fixed prices; time and cost depend on the number and size of pieces, their type and complexity, the floor and lift, any wall fixing, the condition of pieces and whether they are new or used, and whether you need assembly only or with moving and packing. Send a photo of the boxes or the model name so the estimate is more accurate.
Pages related to Al Marwah
For moving to or from Al Marwah see furniture moving in Al Marwah and moving from Al Safa to Al Marwah; for packing delicate items see packing in Al Marwah. For assembly tied to moves in other districts see disassembly and assembly in Al Safa, in Al Rawdah and in Al Shati.
Before you call
Have the shop name or model if you have it, the number of boxes for each piece, whether any piece needs wall fixing, and whether the building has a lift and on which floor. Then contact us by phone or WhatsApp and we will arrange a suitable time.
Preparing the space before assembly
To speed up the work and protect your home, clear the room where assembly will take place of small items, move existing furniture aside if needed and empty the old wardrobe if you will replace it. Make sure there is a socket nearby if we will use a drill, and keep the route from the flat door to the room clear. If you have old pieces to dispose of, tell us so we can arrange to take them out as the new ones come in, which saves two trips. It also helps to have an adult present during the work to make small decisions such as which way a door opens or how high a shelf sits.
Simple maintenance after assembly
About two weeks after assembly, go over the furniture and lightly retighten visible screws, check hinges and wheels and fill any small gaps. Clean the tracks of sliding doors with a soft brush, and do not use oil on tracks unless the maker recommends it, because some oils attract dust. Keep timber surfaces away from direct water and strong sun. If a bed creaks, retightening the joints is usually enough; if it persists, contact us to help find the cause.
Used furniture bought second-hand: check before assembling
In Al Marwah as elsewhere in Jeddah many people buy second-hand furniture from markets or adverts, and this kind needs a closer check before rebuilding. We check that parts and screws are complete, look at old holes and the state of the timber for damp or insects, and check hinges and tracks. If the piece has no booklet, we draw a first assembly plan after numbering its parts by hole pattern and dimensions. We may suggest replacing some old screws or hinges with new ones for better stability; this adds a small cost but saves a later problem.
How we deal with complicated booklets
Some booklets have dozens of steps with similar drawings that confuse anyone without experience. We read the whole booklet before starting any step, mark parts that look alike, and sort small parts into trays or boxes according to the numbers in the booklet. We follow the same order the maker set, because changing the order may leave a panel that will not fit its place. If the booklet is missing or does not match, we look for the maker's online version if possible or rely on our experience with similar pieces.
Children and pets while we work
Tools, small screws and sharp panels can be dangerous to children and animals. We ask parents to keep them out of the room while we work and to leave no screw or tool on the floor or within reach. When we finish we collect spare screws and plastic protectors in a bag for you and wipe dust and sawdust from the floor. In children's rooms in particular we suggest airing the room before the child sleeps there, since some pressed wood and adhesives give off a smell in their first days.
When we say a specialist is needed
There are cases where we tell you plainly that the job needs another specialist: electrical connections or plumbing in kitchen units, installing air conditioners or structural changes to walls. Our speciality is furniture. If part of the project falls outside it, we say so at the start so you can book the right technician at the right time.
Frequently asked questions
Do you assemble new furniture bought from a showroom or online?
Yes. We assemble flat-pack pieces following the booklet and check the boxes and parts with you before starting.
What if a box is missing?
We postpone assembly until the missing box arrives, and we advise contacting the shop before the appointment.
Do you fix tall wardrobes to the wall?
We do where needed and with your agreement after checking the wall type; in rented homes we ask whether drilling is allowed.
Can an old wardrobe be rebuilt in another room?
Yes. We dismantle it with numbering and rebuild it in the new room after checking the condition of the joints.
Do you take away empty boxes after assembly?
We agree it beforehand: we can gather them in one place or put them out as you prefer.
How do I book assembly in Al Marwah?
Call 0548204074 or message us on WhatsApp with the shop name, number of pieces and boxes.